Tradelink on Terminal Server

The tradelink internet network connection setting by default is using a Windows dial up/PPPoE ..... connection 

When a user to try to connect to trandlink in a corp. network (e.g. be hide firewall), they will got the following error. It is because the tradelink try to use the network connection e.g. PPPoE, dial up …… to connect the internet.

 The solution is use the administrator account login the tradelink system, go to “admin” -> “system parameter” -> “system” - > “Internet connection” -> select “Use leased line connection”

 But for the terminal server environment, there are some different:

It depends on the installation method of the tradelink (e.g. in user mode/in admin mode during the install and the user account of the terminal service). It will make the tradelink use the “Wini.ini” in different localtion

The following is the location of “Win.ini”

e.g. C:\Documents and Settings\Administrator\WINDOWS (For Multiple user environments)

e.g. C:\Windows (For local login only)

e.g. User home folder H:\Windows (If User domain account have home folder setup)

 

The following is the tradelink configuration in the “Win.ini”

 

[SEDIF_Schedule]

ConnectControl=ON

CONNECTMIN=60

ActionAfterConnect=Both Send and Receive

ConnectType=CETS

[TRADELINK_CONNECTION]

RASProfile=

Leaseline=1 [The “1” = “Use leased line connection”]

UseProxy=0

ProxyAddr=

[IDAPI]

DLLPATH=C:\VALUNET\IDAPI

Tradelink on Terminal Server